Factor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.0 and 1.5 fairleads are CNC machined from 1 and 1.5 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick.
The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope. The 1.0 and 1.5 fairleads are the industry’s first Hawse fairleads compatible with larger ½ inch diameter rope tube thimbles.
The rope slot height opening is taller to allow the larger ½” tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension “suck down” device. These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a laser engraved logo.
What is the best surface finish for Hawse aluminum fairleads? Without a doubt it is a Type III hard anodized coating. Not cosmetic Type II anodized finishes, not powder coated, and not raw or polished aluminum. Why? Because a hard coating can resist the abrasion damage from a dirty/gritty synthetic winch rope rubbing across it. Especially during extreme side pulls where rope fiber stresses are extremely high. A Mil-A-8625 Type III hard anodized finish leaves a .002” thick Al2O3 ceramic coating that is in the top 5 hardest materials known to mankind (See chart under Corundum/Sapphire). Not too far away from diamond hardness actually. Another valuable material property from hard anodized coatings are the low coefficients of friction. Low friction = lower rope heat. Only drawback? Hard anodizing is not offered in typical bright and fancy anodized colors. All Factor 55 fairleads only come in Mil-A-8625 hard gray finishes. Not fancy, but it is the proper finish to extend the life of your synthetic rope.
NOTE:
Fairleads DO NOT come with mounting hardware.
* The reason for this is depending on your vehicle, bumper, and fairlead mounting thicknesses the shank length of the bolts may need to be longer or shorter to prevent the bolts from contacting the body of your winch. In most cases, the mounting bolts that are supplied by your winch manufacturer are adequate in strength and length. In some cases, longer bolts are required and 3/8″ Grade 5-Grade 8 bolts in 1.25-1.5″ shank length is a good starting point for fitment. 7/16″ bolts may also be used. Please contact us with any specific questions.
MADE IN USA
The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope. The 1.0 and 1.5 fairleads are the industry’s first Hawse fairleads compatible with larger ½ inch diameter rope tube thimbles.
The rope slot height opening is taller to allow the larger ½” tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension “suck down” device. These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a laser engraved logo.
What is the best surface finish for Hawse aluminum fairleads? Without a doubt it is a Type III hard anodized coating. Not cosmetic Type II anodized finishes, not powder coated, and not raw or polished aluminum. Why? Because a hard coating can resist the abrasion damage from a dirty/gritty synthetic winch rope rubbing across it. Especially during extreme side pulls where rope fiber stresses are extremely high. A Mil-A-8625 Type III hard anodized finish leaves a .002” thick Al2O3 ceramic coating that is in the top 5 hardest materials known to mankind (See chart under Corundum/Sapphire). Not too far away from diamond hardness actually. Another valuable material property from hard anodized coatings are the low coefficients of friction. Low friction = lower rope heat. Only drawback? Hard anodizing is not offered in typical bright and fancy anodized colors. All Factor 55 fairleads only come in Mil-A-8625 hard gray finishes. Not fancy, but it is the proper finish to extend the life of your synthetic rope.
NOTE:
Fairleads DO NOT come with mounting hardware.
* The reason for this is depending on your vehicle, bumper, and fairlead mounting thicknesses the shank length of the bolts may need to be longer or shorter to prevent the bolts from contacting the body of your winch. In most cases, the mounting bolts that are supplied by your winch manufacturer are adequate in strength and length. In some cases, longer bolts are required and 3/8″ Grade 5-Grade 8 bolts in 1.25-1.5″ shank length is a good starting point for fitment. 7/16″ bolts may also be used. Please contact us with any specific questions.
MADE IN USA
Thank you for choosing Beacon Off-Road as your trusted provider of quality products. To ensure a smooth shipping experience, please review our policy outlined below:
Order Processing Time:
- In-stock items: We strive to prepare and ship all in-stock items within 2 business days from the date of order placement.
- Larger palletized freight orders, such as bumpers: These orders require additional processing and handling time of 3-5 business days.
- Shock assembly: Depending on the current workload in our shop, shock assembly may take up to 5-7 business days to complete.
Shipping Confirmation:
- Once your order has been shipped, you will receive a shipping confirmation email.
- This email will contain relevant tracking information, enabling you to monitor the progress of your shipment and estimate the delivery date.
In-Store Pickup:
- For your convenience, we offer in-store pickup for orders.
- Orders can be collected daily between 10am and 4pm, during our shop's operating hours.
- You will receive an email notification when your order is ready for pickup.
Canada-Wide Shipping:
- Shipping costs will be automatically calculated at checkout.
- Please note that automated shipping prices may not always be accurate due to the varied size, weight, and shape of the product, as well as the expansive nature of our country.
- If you have paid for shipping and our actual shipping cost is significantly lower, we will promptly issue a refund for the difference.
- In cases where our website calculates shipping costs too low, we may contact you to discuss alternative options or request additional payment.
- If the "pick up in store" option is the only one available for your order, it is likely due to the size and weight of the item(s), which necessitate freight shipping (see Freight Shipping section).
International and USA Shipping:
- Regrettably, we do not offer international and USA shipping services at this time.
- Our shipping is limited to within Canada only.
Freight Shipping:
- For larger freight orders, please contact us for a custom shipping quote.
- When reaching out to us, kindly provide your name, phone number, email, and address. Please specify if the address is residential or commercial.
- Freight shipments to commercial locations that do not require a liftgate are generally more cost-effective.
We strive to provide accurate shipping information and deliver your orders promptly. However, please note that unforeseen circumstances or external factors may occasionally cause delays in the shipping process. We sincerely appreciate your understanding and patience in such situations.
If you have any further questions or require assistance with your order, please do not hesitate to reach out to us at info@beaconoffroad.ca.