$75.00

Shipping calculated at checkout.

Quantity

For you hardcore off-roaders and off-road trainers, the new UltraHook Rope Guard provides complete synthetic rope protection from damaging UV light as well as impact and abrasion damage. As you can see, when using the Rope Guard, all exposed synthetic rope surfaces are positioned behind the guard and fairlead, allowing you to use the Rope Guard as a skid surface when attempting to climb tall vertical obstacles. Made from Kaiser billet 6000 series aluminum and clear anodized for corrosion protection. Easy installation with 4 drive rivets. Keep your synthetic winch rope where it belongs – out of the sun and behind the fairlead.

Engineered and Made In The USA.
FOR THE FOLLOWING PRODUCT APPLICATIONS; FACTOR 55 ULTRAHOOK

Weight:
.4 lbs

Dimensions:
7 × 4 × 1 in

ROPE GUARD INSTALLATION INSTRUCTIONS
We recommend that the FlatLink or UltraHook first be removed from your winch line prior to the Rope Guard installation. Then, remove all rubber pieces from your FlatLink or UltraHook product. A little prying from a flat blade screwdriver should do the trick in popping out the rubber barbs. You will need to reinstall two of the rubber pieces after the Rope Guard installation is completed. We recommend that you place the FlatLink on top of a piece of wood on the ground or workbench surface prior to hammering in the drive rivets. Be sure to orient the Rope Guard in the correct direction (slot facing the rear) prior to proceeding with the rivet installation. For the UltraHook, make sure that the plane of the rubber pad surface is held flat to the wood surface for one side of the rivet installation and pivot the UltraHook over to the other surface for the remaining rivet installation. Now simply insert the 4 included drive rivets and using a ¼ inch punch, hammer the drive rivet posts down until the posts are flush with the top of the rivet head. Reinstall the rubber pads (lubricate the barbs) on the opposing side and you are done.

Thank you for choosing Beacon Off-Road as your trusted provider of quality products. To ensure a smooth experience, please review our policy outlined below:

Order Processing Time:

In-stock items: Ready for pickup within 2 business days.
Larger palletized freight orders (e.g., bumpers): Additional processing time of 3-5 business days.
Shock assembly: May take up to 5-7 business days, depending on shop workload.

Shipping Policy:

Beacon Offroad does not offer standard online shipping options. However, shipping is available upon request. If you would like your order shipped, please contact us via email at info@beaconoffroad.ca to discuss available options and obtain a shipping quote.

In-Store Pickup:

Available daily between 10 AM and 4 PM during shop hours.
You will receive an email notification when your order is ready for pickup.

Freight Shipping:

For larger freight orders, please contact us for a custom shipping quote.
When reaching out, provide your name, phone number, email, and address (specify residential or commercial).
Commercial locations without a liftgate requirement typically offer more cost-effective shipping.

We strive to accommodate your needs and provide the best possible service. If you have any questions or need assistance, don’t hesitate to reach out at info@beaconoffroad.ca.