$185.00

Shipping calculated at checkout.

Quantity

In our mission to preserve your vehicle’s alignment, we have solved yet another weak point. Stock steering brackets are intended for on-road use, but cannot withstand the abuse of off-road driving, nor increased tire sizes.

Since these vehicles have a rear steer setup, the forward load against the tires is pushed rearward into the steering rack. This force causes the steering rack’s vertically bolted center mount to act as a fulcrum on which the rack pivots. This, in turn, makes the bracket the weakest link in securing the steering rack. Over time and under load, the bracket will stretch and distort, causing the bushing to fit loosely around the rack. As a result, this causes play and poor response in the steering.

To solve this problem, we have designed a much more robust bracket. CNC milled from 6061 aluminum, our HD Billet Rack Clamp improves upon the stock bracket in all use cases.

Firstly, the beveled edge on the bushing mating surface has been removed. This helps secure the bushing from wandering horizontally. And secondly, our bracket is approximately 50% larger than the stock bracket. This allows our bracket to withstand just over 1000 lb-ft more than the stock bracket (Strength numbers generated in CAD analysis).

Features:
CNC milled from 6061 aluminum
Easy two bolt installation, reuses factory hardware (Uses supplied washers)

Fitment:
96-02 4Runner, 01-07 Sequoia, 95-04 Tacoma, 00-06 Tundra

Notes:
It is highly recommended that this be used in conjunction with polyurethane steering rack bushings

Disclaimer:
Warranted for off-road use only. The end user assumes all risks involved when installed.

Thank you for choosing Beacon Off-Road as your trusted provider of quality products. To ensure a smooth experience, please review our policy outlined below:

Order Processing Time:

In-stock items: Ready for pickup within 2 business days.
Larger palletized freight orders (e.g., bumpers): Additional processing time of 3-5 business days.
Shock assembly: May take up to 5-7 business days, depending on shop workload.

Shipping Policy:

Beacon Offroad does not offer standard online shipping options. However, shipping is available upon request. If you would like your order shipped, please contact us via email at info@beaconoffroad.ca to discuss available options and obtain a shipping quote.

In-Store Pickup:

Available daily between 10 AM and 4 PM during shop hours.
You will receive an email notification when your order is ready for pickup.

Freight Shipping:

For larger freight orders, please contact us for a custom shipping quote.
When reaching out, provide your name, phone number, email, and address (specify residential or commercial).
Commercial locations without a liftgate requirement typically offer more cost-effective shipping.

We strive to accommodate your needs and provide the best possible service. If you have any questions or need assistance, don’t hesitate to reach out at info@beaconoffroad.ca.